Driveways & Concrete
Pressure washing to clear algae, mildew, and orange irrigation rust off driveways and walkways that stay damp longer here than in drier parts of the county.
HUMIDITY FROM BOTH SIDES
Pressure washing and paver cleaning for Merritt Island homes sitting between two lagoons, where humidity and a high water table keep concrete and pavers damp longer than most of the county.
Pressure washing in Merritt Island
Merritt Island sits on a strip of land between two lagoons, so the air stays heavier and yards stay damper than areas further inland. That extra humidity, combined with a high water table, means shaded concrete, pool decks, and pavers hold moisture longer after rain and grow green algae and mildew faster. We wash driveways, pool decks, and walkways to get ahead of that buildup before it turns into staining that's harder to lift.
Flatwork here — driveways, pool cage decks, walkways — gets pressure washed to clear algae and mildew that thrive in the humidity. Orange staining near sprinkler heads is often irrigation rust, which shows up on properties running well water instead of municipal service — that's a different problem than algae and needs its own treatment. Siding and pool cages get soft-washed at low pressure. If your pool deck or walkway is paver, we don't stop at the wash — blasting pulls the joint sand out, so re-sanding and sealing keeps water and rust from settling back in, with the water table running high.
What that looks like here
Pressure washing to clear algae, mildew, and orange irrigation rust off driveways and walkways that stay damp longer here than in drier parts of the county.
Low-pressure soft-wash for siding, soffits, and screened pool cages — cuts mildew without blowing out screen mesh or forcing water in where it doesn't belong.
Pool deck and walkway pavers get washed, re-sanded, and sealed as one job, so the joints hold up against a high water table instead of opening back up.
By the numbers
The Brevard County tax roll counts 15,967 single-family homes in Merritt Island. The typical one was built in 1978, and about 82% were built before 2000.
Older homes mean older driveways, walks and pool decks, and years of mildew and irrigation staining that a garden hose will not move.
Source: Florida Department of Revenue, Brevard County 2026 preliminary tax roll.
Free estimate
We'll measure, look at where the water goes, and leave you an itemized written estimate — anywhere in Merritt Island. No charge, no pressure.
Local questions
Merritt Island sits between two lagoons, so humidity stays high and shaded concrete rarely fully dries between rains — that's what keeps algae and mildew coming back faster than in drier parts of the county. Washing gets rid of it, but shaded, low-lying spots will need it again sooner than a sunny driveway.
That's often irrigation rust from well water, on properties running private wells rather than municipal service. It needs different treatment than algae — we'll look at where your sprinklers hit before we quote the job.
It's part of why we push re-sanding and sealing instead of a wash-only job. With moisture sitting closer to the surface here, open joints pull water and rust back in faster, so locking the sand down and sealing the surface matters more than it would on a drier, higher lot.
Keep looking around
Fastest answer
Most questions we can answer on the phone in two minutes, and if we need to see it we'll book the walkthrough while you're on the line.
(321) 586-9227Or text a photo of the space — that's often the fastest way to get a real answer. Prefer email? [email protected].
Free estimate
Tell us what you're picturing and we'll come measure it.
Five quick questions — then you're booked in and someone reaches out within 5 minutes. Prefer to talk? Call (321) 586-9227.