In Brevard County the typical cost to seal a paver surface in 2026 runs about $1.50 to $3.00 per square foot, depending on surface size, condition, and the sealant grade needed to withstand salty air, strong UV, and summer downpours.
The base cost includes cleaning, crack repair, sealant material, and labor. Cleaning removes algae, oil, and sand that would trap moisture, while crack repair ensures the sealant adheres evenly across the whole area.
Labor rates in coastal Florida reflect the need for experienced crews who know how to protect the pavers from salt corrosion. Material costs vary with the type of polymer used; higher‑performance sealants carry a higher price tag.
Salt air, intense UV, and frequent summer thunderstorms all attack a paver's surface. A sealant that can block moisture and resist UV fading will last longer on a patio that faces the ocean.
During hurricane season, wind‑driven rain can push water into tiny gaps. A high‑quality sealant fills those gaps and reduces the chance of freeze‑thaw damage when cooler nights arrive.
Most contractors in Brevard quote $1.50 to $3.00 per square foot after a site inspection. The lower end usually covers a basic acrylic sealant on a clean, flat surface. The higher end includes premium polyurethane or epoxy blends that protect against salt spray.
Expect an additional $150 to $300 for larger projects that require extra equipment, such as a pressure washer with a sand‑blasting attachment. Prices can rise if the pavers have deep stains, extensive weed growth, or need significant crack filling.
A professional seal job starts with a thorough pressure wash, followed by a hand‑scrub of stubborn spots. After the surface dries, the crew inspects for loose pavers, fills cracks, and applies the sealant in two even coats.
You can learn more about our paver sealing service, which follows that exact process and provides a written warranty that outlines what the contractor will do if the seal fails under normal use.
Q: How often should I reseal my pavers in Brevard?
A: In our experience most homeowners reseal every three to five years, but if you notice water beading less or colors fading after a harsh summer, it's time to schedule a fresh coat.
Q: Does sealant add slip resistance?
A: Yes, most sealants contain a fine grit that improves traction. The effect is most noticeable on wet surfaces after a rainstorm, which is common in the county.
Q: Can I seal on my own to save money?
A: DIY kits start around $0.80 per square foot, but you still need a pressure washer, proper surface prep, and two coats. Skipping professional prep often leads to premature wear and higher long‑term costs.
Q: Will sealant protect against oil stains?
A: Sealant creates a barrier that makes oil easier to wipe away, but fresh spills should still be cleaned promptly. A high‑performance sealant resists oil penetration better than basic acrylic.
Q: Do I need to move furniture before sealing?
A: Yes, all movable items should be cleared to allow the crew to reach every joint. Heavy pieces can be placed back after the sealant cures, usually within 24 hours.
Want a straight answer for your own driveway or patio? Groundworks gives every Brevard homeowner a free written estimate — call or text (321) 586-9227.
— Groundworks Pavers & Turf · licensed & insured · Brevard County, FL